Volkswagen Touran Service Manual: Wax Underbody Protection -D 316 000 A1-
|Wax Underbody Protection -D 316 000 A1-
|Wax Underbody Protection -D 316 000 A1- is an exceptional
long-term corrosion protection.
|The Wax Underbody Protection is based on a solvent-free,
oxidative drying system and provides optimal corrosion
protection for the body underbody area.
|This long-term corrosion protection is established by its
excellent adhesion at both very low and high temperatures to the
|The product forms a light brown, elastic and non-tacky
|It is not necessary to combine the film at an elevated
|Wax Underbody Protection -D 316 000 A1- technical
|The material is primarily used in the vehicle area.
|Make sure that the base surfaces are dry.
|The ready-made product is applied using brushes at the
material temperature of +20 C (68 F) to 35 C (95 F).
|The material can be carefully warmed up to 45 C (113 F)
immediately before applying (< 5 minutes) if it is required by
the application technique.
|The oxidative hardening product can form a film on the
surface after a short time. This has no impact on the corrosion
protection or other properties.
|100% active ingredient content
|Exceptional long-term corrosion protection
|Before starting to apply, it is necessary to read the safety
measures and advice in the safety data sheet.
|Even for products which are not required to be labeled by
law, the usual safety measures must be observed for chemical
|The surfaces that are to be treated must dry and be free of
grease and dust.
|Bring the Wax Underbody Protection to the application
temperature of 20 to 35 C (68 to 95 F).
|Apply the material to the body parts that are to be
protected and spread using brushes.
||Mixture of corrosion
protection additives with a sulfonate base, alkyd, mineral oil aromatic
extracts, pigments, thickening agents, drying agents and fluorescent
||Light brown, viscous fluid
||1850 +- 350 mPas (System
PP50, d= 760 1/s
|Density/15 C DIN EN ISO
||0.995 +- 0.015 g/ml
|Solid matter content
||99 +- 1 %
|Flashpoint DIN EN ISO
||approximately 150 C
||20 to 35 C (68 to 95
||At temperatures of +10 C
to +30 C (50 F to 86 F) for approximately 12 months
Wax Underbody Protection -D 316 D38 A2-
Wax Spray -D 322 100 M2-
Wax Spr ...
2017-2022 © Copyright www.sooja.site