VW Touran manuals

Volkswagen Touran Service Manual: Tire Pressure Monitoring Sensor without Metal Valve, Removing and Installing, Service Version

Volkswagen Touran Service Manual / Wheel  and Tire Guide Information / Tire Pressure Sensor / Tire Pressure Monitoring Sensor, Removing and Installing / Tire Pressure Monitoring Sensor without Metal Valve, Removing and Installing, Service Version

Special tools and workshop equipment required
Torque Wrench -VAG1410-
Perform the Following:
Removing
  Remove the tire from the disc wheel. Refer to → Chapter "Tires, Mounting".
   
See Which Version is Installed Before Starting Any Work.
I - Service Version
The tire pressure monitoring sensor is attached to the valve with an inner TORX screw -1- on the Service version.
If the service version is installed, the following repair procedure must be used. Refer to → Anchor.
II - Vehicles Before Customer Delivery
The tire pressure monitoring sensor is attached to the valve with a square screw with a flat head -2- on vehicles before customer delivery.
If the production version is installed, the following repair procedure must be used. Refer to → Anchor.
  Remove the screw -arrow- from the tire pressure monitoring sensor -1-.
  Tire Pressure Monitoring Sensor without Metal Valve, Removing and Installing, Service Version
  Counterhold metal valve using retainer (for example 2 mm spiral bore) while doing so.
Installing
  Caution
Clean the valve opening before installing the Tire Pressure Monitoring Sensor.
  Tire Pressure Monitoring Sensor without Metal Valve, Removing and Installing, Service Version
  Press the tire pressure monitoring sensor -1- onto the disc wheel (rim) and tighten -arrow-.
  Counterhold metal valve using retainer (for example 2 mm spiral bore) while doing so.
  Note
Visually check the valve after installing it and make sure it is tight. The tire pressure monitoring sensor -1- must not have any play when it is installed and it must touch the supports in the rim bed.
Do not tighten the valve again to the tightening specification after it has been installed.
Tightening Specifications
Refer to → Chapter "Overview - Tire Pressure Monitoring Sensor without Valve"
  Tire Pressure Monitoring Sensor without Metal Valve, Removing and Installing, Service Version
    Tire Pressure Monitoring Sensor with Valve, Removing and Installing
    Removing       Remove the union nut -1-.   Remove Tire Pressure Monitoring ...

    Tire Pressure Monitoring Sensor without Valve, Removing and Installing, Vehicle Before Customer Delivery
    Special tools and workshop equipment required Torque Wrench -VAG1410- Perform the Following: Remo ...

    Other materials:

    Volkswagen Touran Owners Manual. Overview of the driver door
    Fig. 4 Overview of the controls in the driver door (left-hand drive vehicles). The controls are mirrored for right-hand drive vehicles Key for  : Warning lamp for anti-theft alarm or deadlock mechanism Door release lever Central locking button for locking and unlocking the vehi ...

    Volkswagen Touran Owners Manual. Information stickers and plates
    First read and observe the introductory information and safety warnings Safety certificates, stickers and plates containing important information on operating the vehicle are factory-fitted in the engine compartment and on certain parts such as the tank flap, front passenger sun visor, the ...

    2017-2022 © Copyright www.sooja.site